Ink, itself, is a very sensitive chemical substance. Unlike the ink used in pens, cartridge ink is subject to drying when it interacts with the air. Therefore, when the cartridges are not used for a while, the ink starts to dry and clogs the print head and even the ink channels. As mentioned in our instructions site, www.refillmanual.com, there is a certain refill procedure, which should be followed up in each refills. And, the following two is the primary steps in refilling;
1. Cleaning the print heads
2. Taking the waste ink out of the cartridge
In case, the ink is dried at the print head and we skip the first the item in the procedure, the following happens;
* Because the ink is dried at the edge of nozzles or print head, we will be unable to take the waste ink out.
* In the worst case, it can lead a physical damage in the print head. Because, vacuum emerged in MIS ink refill machines is very strong indeed.
Therefore, we need to soften the dried ink at the print head and inside the ink channels so that we can easily vacuum the waste ink easily.
Steam generator produces pressurized steam. And with this steam, dried ink is softened easily. Due to the pressure, the steam can go to inner parts of the ink channels. Eventually, this process eases the vacuum of the waste ink. Standard water capacity is 1 lt. in MIS steam generators. With this capacity, steam is produced to clean approximately 300 ink cartridges. Upon desire, we can also offer 2 lt and 5 lt models.
Ink is sprayed through the print head with an integrated steam gun. There is an approximately 1 meter long and flexible hose between the unit and the steam gun. Thus, the operator can easily use it. It is recommended to have a long waste bin so that softening the dried ink at the print head can be done in a cleanly manner.
Usually spraying the steam through the print head should take 10 seconds. Duration can be extended according to the actual situation of the clogging at the print head.
The crucial point here is to spray the steam in an inclined position, around 45 degrees. Furthermore, steam should be sprayed in one direction following the physical shape of the print head. And, the steam should not be sprayed from the sides of the cartridge.
Steam generator is not only used prior to refilling to soften dried ink, but also used to clean the cartridge after refilling to remove ink residues on the surface of the cartridges.
MIS has changed everything. We are now leaders in ink refilling in our
area. This machine has changed our life, we are now confident that our
result are more than satisfactory for our clients.
My experience with the PRO-6VC has been; precise ink refilling and vacuuming results, excellent quality instruments, and ease of use. The machine is very simple to operate for the beginner as I was when I began my ink-refilling business operations. I can certify that I've produced correct results with my machine and haven't experienced any breakdown or failure.
It has now been 4 months since I took the plunge and decided to buy the business pack including the computerised PRO-6 and the easy to use twin vacuum chamber for my business in the UK. After taking a few days to familiarise myself with the equipment (which by the way, arrived very quickly from Turkey after I ordered it) my business has gone from strength to strength.
Thanks to MIS, we finally opened our inkjet and toner refill service in Malta. The MIS PRO-6 and PRO Deluxe ink cartridge refill machines are absolutely superb.
After searching for a long time in the market,try to find a good, capable, and easy to use refill machine, finally we come to the right place. For the first time, we realised this machine was different from others.
Customer satisfaction and after sales support are very important to us. With this regard, we published a website giving all details about how to refill cartridges with MIS cartridge refill machines. Instructions published in the website are prepared with the vast experience of MIS Team, who is already into refill business since 2000. Enjoy!
More About MIS
Why do you need refill machines ?
When it comes to product quality and customer satisfaction, the entire business cycle should be planned seriously and carefully. Although it was still not possible for toner cartridges, refill companies could have refilled old style cartridges by hand without any refill equipment in the past. However, recently, the cartridges have sponges or foams. And this brings several problems, which has to be solved during refilling process. These problems are air pressure balance (which is called as priming), stop printing after several print outs, or missing lines on the sheets.
Why MIS Cartridge Refill Machines ?
MIS is in the refill business since 2000. Our experienced team designs and produces the machines to address real solutions to real and precise refilling needs.
Thanks to intuitive design concept, our machines are ergonomically perfect for all users. Therefore, any unexperienced user can start to use MIS cartridge refill machines within 30 minutes.
Terms and Conditions
We process and ship orders within 5 business days after receiving the money transfer. We export our products worldwide through air, sea, and road freight. The shipments are done by long established companies such as TNT Express and DHL Global Forwarding.
We accept wire transfer (T/T) and mail order form.
Product Warranty
MIS cartridge refill machines and toner workstations are provided with 2 year guarantee against any workmanship and defective parts. Thanks to smart parts designing concept, maintenance and repairs can be easily done by even an unexperienced personnel all around the world.
Vast Experience 
Customer satisfaction and after sales support are very important to us. With this regard, we published a website giving all details about how to refill cartridges with MIS cartridge refill machines. Instructions published in the website are prepared with the vast experience of MIS Team, who is already into refill business since 2000. Enjoy!
Ink, itself, is a very sensitive chemical substance. Unlike the ink used in pens, cartridge ink is subject to drying when it interacts with the air. Therefore, when the cartridges are not used for a while, the ink starts to dry and clogs the print head and even the ink channels. As mentioned in our instructions site, www.refillmanual.com, there is a certain refill procedure, which should be followed up in each refills. And, the following two is the primary steps in refilling;
MIS has changed everything. We are now leaders in ink refilling in our
area. This machine has changed our life, we are now confident that our
result are more than satisfactory for our clients.
My experience with the PRO-6VC has been; precise ink refilling and vacuuming results, excellent quality instruments, and ease of use. The machine is very simple to operate for the beginner as I was when I began my ink-refilling business operations. I can certify that I've produced correct results with my machine and haven't experienced any breakdown or failure.
The machine is very user friendly, fast, and very productive. Before it was taking 10 minutes to refill one single cartridge.
It has now been 4 months since I took the plunge and decided to buy the business pack including the computerised PRO-6 and the easy to use twin vacuum chamber for my business in the UK. After taking a few days to familiarise myself with the equipment (which by the way, arrived very quickly from Turkey after I ordered it) my business has gone from strength to strength.
Thanks to MIS, we finally opened our inkjet and toner refill service in Malta. The MIS PRO-6 and PRO Deluxe ink cartridge refill machines are absolutely superb.
If you're thinking of buying products from M.I.S - have no fear!
When I wished to start in the refilling business, I spent many weeks researching for the best refilling equipment.
After searching for a long time in the market,try to find a good, capable, and easy to use refill machine, finally we come to the right place. For the first time, we realised this machine was different from others.